6. Put the steel ball support and 34 roll steel
ball into gearbox.
7. Install 3 grinder antivibration pads and 3
antivibration bushes into coffee powder
container.
6 7
8. Install the coffee powder container into the
gearbox, the bigger hook on the coffee
powder container should compare to the
bigger groove. Screw tightly.
9. Install the line pencil into the grinder motor,
red line correspond to the red mark.
8 9
1
Note: The installation direction for
the grinder antivibration pads and 3
antivibration bushes.
10. Insert the already installed grinder motor
in the grinder support, and lock screws.
11. Install the coffee powder hopper on the
coffee powder container, and lock the screw.
10 11
1
1
Service Manual
Intelligent Fresh Ground Coffee Machine
KLM1602
60
Repair
To Next Page
Loading...
