16. Put the already installed support lower
grinder into the coffee powder container
and lock the screw.
17. Install the grinding adjustment spring and
steel ball into the coffee powder container
pillar.
16 17
1
Repair
12. Install 3 spring sleeves into the hole of
the support lower grinder.
13. Install the screw pin worm drive and
conical burr to support lower grindor.
12 13
14. Put 3 conical burr protective steel balls
and spring into support lower grinder.
15. Put the felt ring into the already installed
coffee powder container.
14 15
61
To Next Page
Loading...
