flowIQ® 3100 TECHNICAL DESCRIPTION
Kastup A/S • Tehial Desiptio • 5512-1242_D1_GB • 09.2016
The table below summarizes and describes the data comprised by the Wireless M-Bus data package:
The etes seial ue. The seial ue ill ee e epted.
Identification as cold water meter
Kamstrup's specific Wireless M-Bus producer-ID
Information on length and format of data package
Information on encryption of data package
The current meter reading from the meter's legal register
Meter reading of the 1
st
of the month if the 'R' value 1, 3, 5 or 7 is selected
See Optional register in data logger
Maximum flow, which has been measured in the last completed month,
respectively 24 hours, provided the 'R' value 2, 4 or 9 has been selected.
Minimum water temperature for the last completed month or day depending on
the choice of the 'R'
Minimum, maximum or average ambient/meter temperature, latest month or
24 hours – depedig o hoise of ‘- value
Info codes which are active at present
Info codes which have been active within the latest 30 days including
information on how long they have been active –
on a scale of 1-7
For more information - See section
Optional register in data logger
*)
Measuring the water temperature is only valid for meter sizes 1.6, 2.5 and 4.0 m
3
/h
If encryption has been selected when submitting the order, all variable data will be encrypted with 128 bit
AES counter mode encryption. Kamstrup A/S recommends encryption.
If the meter is configured for Wireless M-Bus mode T1 OMS, data transmission will only take place every 15
minutes – four times per hour.
Kamstrup does not offer reading devices for Wireles M-Bus mode T1 OMS.