Kamstrup MULTICAL 801 - Prog. Data Logger + RTC + 4; Type 67-00-24;67-0 Y; Type

19Kamstrup A/S • 5512603_C1_GB_03.2016
MULTICAL® 801
8.6 Prog. data logger + RTC + 4…20 mA inputs + pulse inputs,
type 67-00-22
The module hs connection possibility for two pressure trnsmitters on
terminls 57, 58 nd 59 nd cn be djusted for current reding or pressure
rnge 6, 10 or 16 br.
The module is prepred for remote reding, dt from meter/module being
trnsferred to the system softwre vi the externl GSM/GPRS modem
connected on terminls 62, 63 nd 64.
Furthermore, the module hs two extr pulse inputs, VA nd VB.
The module must be powered by 24 VAC.
8.7 Lon Works, type 67-00-24/67-0Y
Re mounting of Lon Works type 67-00-24, see instlltion guide 5512-396
(DK) or 5512-403 (GB).
8.8 Wireless M-Bus, type 67-00-30/67-00-31/67-00-35/67-00-38
The rdio module hs been designed to form prt of the hnd-held Wireless
M-Bus Reder systems of Kmstrup A/S t license-free rdio frequency (868
MHz).
The module fulfils the C-mode specifictions of prEN13757-4 nd cn thus
form prt of other systems using Wireless M-Bus C-mode communiction.
The rdio module comes with internl ntenn nd externl ntenn
connection s well s two pulse inputs, which re identicl with the
previously described pulse inputs.
The Wireless M-Bus rdio trnsmitter is switched off on disptch from the
fctory. It turns on utomticlly when one litre of wter hs run through the
meter. The rdio trnsmitter cn lso be switched on by mens of  forced
dil-up to the meter (keep both front keys pressed for pprox. 5 s. until CALL
is displyed).
8.9 ZigBee® + pulse inputs, type 67-00-60
The ZigBee® module is used for wireless communiction nd cn form prt
of  remote reding system, in which severl units cn communicte with
ech other.
The pulse inputs of this module re identicl with the previously described
pulse inputs.
The ZigBee® module requires mins supply.