Kamstrup MULTICAL 801 - SIOX Module; Type 67-00-64;67-0 M; Pulse Inputs (VA, VB)

20 Kamstrup A/S • 5512603_C1_GB_03.2016
MULTICAL® 801
8.10 Metasys N2 + pulse inputs, type 67-00-62
The N2 module is used for dt communiction between meter nd N2
Mster in  Johnson Controls System.
The RS485 port is glvniclly seprted from the meter.
The pulse inputs of this module re identicl with the previously described
pulse inputs.
The N2 module requires mins supply.
8.11 SIOX module (Auto detect Baud rate), type 67-00-64/67-0M
SIOX is used for dt reding of smll nd medium-sized groups of het
meters vi cble, the dt redings being presented by the min system,
e.g. MCom, Fix or Telefrng. Further informtion on these systems cn be
ordered from the supplier in question. Furthermore,  configurtion tool is
vilble from Telefrng.
The two-wire seril SIOX bus connection is optoisolted from the meter
nd is connected without regrd to polrity (i.e. the polrity is unimportnt).
The module is powered by the SIOX bus. Communiction speed between
300 nd 19,200 bud. The module utomticlly uses the highest possible
communiction speed. The module converts dt from KMP protocol to SIOX
protocol.
8.12 BACnet® + pulse inputs, type 67-00-66
The BACnet® module communictes with BACnet® on MS/TP vi RS-485 s
 mster/slve or slve device.
The BACnet® module trnsfers  number of both ctul dt s well s
ccumulted dt.
Furthermore, info codes for generl lrm, flow error, temperture error,
wter lekge, pipe burst, ir in system, nd wrong flow direction cn be
trnsmitted to the BACnet® Controller.
The two pulse inputs llow connection nd reding of two dditionl meters
for e.g. wter nd electricity with pulse output.