Kamstrup ULTRAFLOW 54 User Manual (English)

Other manuals for Kamstrup ULTRAFLOW 54

Questions and Answers:

G
gchoiAug 13, 2025
What to do if Kamstrup Measuring Instruments show no accumulation of m³?
- D
  Deborah CraigAug 14, 2025
  If your Kamstrup Measuring Instruments are showing no accumulation of m³, several factors could be at play. First, examine the flow sensor connection, using a PULSE TESTER if needed. Incorrect connections can prevent proper measurement. Ensure the flow sensor isn't inverted and is installed in the correct direction. Air in the sensor or cavitation from valves and pumps can also lead to this issue; check for these conditions in the system. Finally, a faulty flow sensor can cause this problem, in which case you should consider replacing the flow sensor or sending the meter for repair.
M
Meghan GrahamAug 17, 2025
Why are my Kamstrup ULTRAFLOW 54 erroneously accumulating m³?
- D
  dianeevansAug 17, 2025
  If your Kamstrup Measuring Instruments are erroneously accumulating m³, it could be due to several reasons. One potential cause is erroneous programming. Verify that the meter factors of the calculator and flow sensor correspond correctly. Another cause could be air in the sensor or cavitation from valves and pumps. Check the system for these issues. Finally, a flow sensor error might be the culprit, in which case you may need to replace the flow meter or send the sensor for repair.
A
Audrey MasonAug 21, 2025
What to do if Kamstrup ULTRAFLOW 54 have no display function (blank display)?
- J
  jennifergarciaAug 21, 2025
  If the display on your Kamstrup Measuring Instruments is blank, it likely indicates a lack of voltage supply and backup. You should replace the back-up cell and also replace the battery or check the mains supply to resolve this issue.
M
Michael HammondAug 25, 2025
How to fix Kamstrup Measuring Instruments when there is no updating of display values?
- S
  Susan BakerAug 25, 2025
  If the display values on your Kamstrup Measuring Instruments are not updating, the most likely cause is a lack of power supply. To resolve this, replace the battery or check the mains supply.
T
Timothy VaughanAug 28, 2025
What to do if my Kamstrup Accessories meter is not accumulating m³?
- C
  Carol WoodsAug 28, 2025
  If your Kamstrup Accessories meter is not accumulating m³, it could be due to several reasons. First, ensure the flow sensor connection is correct, using a PULSE TESTER if necessary. Also, verify that the flow sensor direction is correct and that there is no air in the system or cavitation from valves and pumps. If the issue persists, the flow sensor might be faulty, requiring replacement or the meter to be sent for repair.
B
Bob HigginsSep 1, 2025
Why is my Kamstrup Accessories meter erroneously accumulating m³?
- M
  Marie SalazarSep 1, 2025
  If your Kamstrup Accessories meter is erroneously accumulating m³, it could be due to incorrect programming. Verify that the meter factors of the calculator and flow sensor correspond. Also, check for air in the sensor or cavitation from valves and pumps. If these steps don't resolve the issue, the flow sensor may be faulty and require replacement or repair.
B
Brooke MorganSep 5, 2025
What to do if my Kamstrup Accessories has no display function (blank display)?
- J
  Jacob GonzalezSep 5, 2025
  If the display on your Kamstrup Accessories is blank, it indicates a lack of voltage supply and backup. Try replacing the back-up cell. If that doesn't work, replace the battery or check the mains supply.
P
pharrisonSep 9, 2025
How to fix no updating of display values on Kamstrup Accessories?
- T
  Teresa MorrisSep 9, 2025
  If the display values on your Kamstrup Accessories are not updating, it is likely due to a lack of power supply. Replace the battery or check the mains supply to resolve this issue.