Rev. 1.00
20801-EDEBDA0232-4716-1_EN
33
KBR multicomp F144-NC-1V1C6DO6RO-2Description of the display window
7.8 Error message window:
Select submenus by pressing .
In the submenus of this window, the possible messages are displayed, as well as
the display con guration.
The following error messages can be con gured:
Alarm submenu Possible actions
O
Message
Alarm relay
Message and relay
Missing measuring voltage
Missing stage power
PFC too small
THD (voltage harmonics) too high
Operating cycle limit exceeded
(contactor stages)
Missing measuring current
Low load operation
If a submenu is selected (by pressing ), the error message dialog can be
changed by pressing
to start entering values, to change the settings and
to save them.
To Next Page
Loading...
