Rev. 1.00
20801-EDEBDA0232-4716-1_EN
6
KBR multicomp F144-NC-1V1C6DO6RO-2 Introduction
Safety notes
In order to prevent operating errors, handling of the device has been kept as
simple as possible. This way, you will be able to use the device very quickly. In
your own interest, however, the following safety notes should be read carefully.
Warning
The applicable DIN / VDE regulations must be observed for installation!
Power supply connection, setup and operation of the device must be per-
formed by quali ed personnel only. Quali ed personnel as de ned in the safety
notes in this user manual are those authorized to set up, ground and mark
devices, systems and circuits in accordance with the applicable standards and
regulations.
To prevent re and electric shocks, the device must not be exposed to rain or
moisture!
Before connecting the device to the power supply, check whether the local
power supply conditions comply with the speci cations on the device name-
plate.
A faulty connection can lead to the destruction of the device!
For device connection, the data given in the connection diagram must be
complied with (see chapter “Connection diagram”) and the connection lines
must be voltage-free. When wiring, always ensure that all wiring material used
is neither damaged nor defective
and that the polarity is correct!
In order to ensure proper and safe product operation, ensure the device is
transported, stored, installed and assembled and carefully operated and main-
tained in accordance with the speci cations.
A visibly damaged device must generally be considered un t for use and
disconnected from the power supply. Error detection, repair and maintenance
work may only be carried out in our facilities or after contacting our service
team.
Opening the device without authorization will render your warranty null and
void. Correct operation can no longer be guaranteed!
Opening the device may expose live parts. Capacitors in the device may still be
charged, even if the device has been disconnected from all voltage sources. Do
not operate open devices under any circumstances!
Systems that are at risk from lightning strikes must feature lightning protection
for all input and output lines (see chapter “Protective measures” for recommen-
dations).
To Next Page
Loading...
Need help?
General
