KEB COMBIVERT F5 BASIC - Page 105

6
119
24.06.02
KEB COMBIVERT F5-G / B
Name: Basis
6
Functional Description
© KEB Antriebstechnik, 2002
All rights reserved
Chapter Section PageDate
Operating and Appliance Data
Adr.
min max
default
0E09h
0.1
-
-
--
Display of the software date of the power section. Display and value range like at In.7.
In. 9 Software date LT
Adr.
min max
default
1
-
0
655350
s.a.
In.10 Serial number / date 0E0Ah
In.11 Serial number / counter 0E0Bh
In.12 Serial number / Ackn.-No. high 0E0Ch
In.13 Serial number / Ackn.-No. low 0E0Dh
In.14 Customer number / high 0E0Eh
In.15 Customer numer / low 0E0Fh
In.16 QS-number 0E10h
The serial number and the customer number identify the inverter. The QS-number contains production internal information.
Adr.
min max
default
0E08h
0.01
-
-
9.990.00
In. 8 Software version LT
This parameter shows the software version of the power section. Definition like at In.6.
Adr.
min max
default
0E11h
1
-
P-ID
P-ID0
In.17 Temperature mode
This parameter is for service personell only.