KEB COMBIVERT G6 Programming Manual

48
Generalcontrolcardparameters(operatorfunctionality)
Parameter Id-Text Name CANSDOIndex
os12 operator command 0x208C
Subindex 0
Object type Variable
Data length unsigned Byte
Access Read write
Meaning Setting of instructions in accordance with the coding mentioned below
Coding
0
non
1
Load default values in all operator sets
2
reinitialize LT image
Parameter Id-Text Name CANSDOIndex
os13 operator state 0x208D
Subindex 0
Object type Variable
Data length unsigned Byte
Access Read only
Meaning Displays the status of the power unit and the mapping of the power
unit parameters in the control board.
Coding
Bit 0
reserved
Bit 1…2
PU-conf.-ID
State
0:Unknownpowerunit-ID
2:Powerunit-IdOK
4:Powerunit-Idwrong
Bit 3…5
PU-
Image state
0:PUimagenotinitialised
1:writePUimage
2:readPUimage
3:PUimagechanged
4:PUimageinitialised
5:PUimagecheck
6:PUimagenotavailable
Bit 6…15
reserved

KEB COMBIVERT G6 Specifications

General

Brand	KEB
Model	COMBIVERT G6
Category	DC Drives
Language	English