KeTop - Specific Operating Instructions KeTop T100
100 User's Manual, version: 3.1 / material no.: 57448
© KEBA 2006
Control of Buttons (Pushbuttons)
This toolbox enables a simple functional control of the buttons of the Ke-
Top.
1
2
3
a
1.......Symbols for the left LEDs of the membrane keypad (if available)
2.......Symbols for operating elements
3.......Symbols for the right LEDs of the membrane keypad (if available)
a.......The black ring signalizes the actuation of an operating element
By clicking on one of the three symbols for operating elements (2), the cor-
responding LEDs of the operating elements can be switched on, off or to
flashing. The first click switches the LED to flashing, the second click
switches the LED on, and the third click switches the LED off again.
The same applies to the LEDs of the membrane keypad (1 and 3).
The actuation of an operating element is signalized by a black ring (a). This
ring is grey if the operating element is not actuated.
To Next Page
Loading...