Keba KeTop T100 - Actions on next Startup

Handheld Terminal KeTop - Specific Operating Instructions
User's Manual, version: 3.1 / material no.: 57448 99
© KEBA 2006
Actions on next Startup
In this window, you can determine actions that are executed after a restart
of the KeTop.
z Update OS Image on next Startup:
If you select this item, an OS(Operating System) image will automati-
cally be loaded from the BOOTP Server via the network next time the
KeTop is started.
Note
In this case, the Ethernet connection must have been established, the
BOOTP Server must be correctly configured and an OS image file must be
available on the server.
z Disable internal network controller:
If you select this option, the internal Ethernet interface „CELAN1: On-
board Ethernet“ (see Start -> Settings -> Control Panel -> Network ->
Network Configuration) will be deactivated during the next start-up.
Note
This function is needed, for instance, for the installation of an Ethernet in-
terface in the PCMCIA slot.
The actual configuration of the Ethernet controllers must be performed in
the system control.
z Show Inputpanel on Startup:
If you select this item, the softkeyboard will be launched at every
startup.