KeTop - Specific Operating Instructions KeTop T100
98 User's Manual, version: 3.1 / material no.: 57448
© KEBA 2006
Display and Touch Screen Settings
In this window, the brightness and the contrast for the display are set.
In this window you can also calibrate the touch screen.
Setting the Handwheel to Zero
The handwheel outputs a 16-bit value which can be processed in the cus-
tomer application as needed (e.g.: 0-65535, +-32767, ...).
In the dialog box, the value from 0 to 65535 is displayed. When the device
is turned on, the value of the handwheel will be set to 0.
If the key „Set“ is pressed, the current value of the handwheel will be re-
placed by the start value.
To Next Page
Loading...