Keba ServoOne junior - Maximum Speed (S-0-0091)

34
Parameter conguration
ServoOne User Manual SERCOS II and III
ID no.: 1108.26B.3-00 Date: 04/2020
Parameter conguration
6.6 Maximum speed (S-0-0091)
The parameter S-0-0091 is related to parameter P-0328, P-0333, P-0334, P-0337.
On this topic, see also “Table 11.2 List of the SERCOS parameters supported” on page
73.
The maximum speed set in parameter S-0-0091 must not exceed the limits from
parameters P-0328, P-0333 and P-0334 and will also have a direct effect in the
parameter P-0337 SMax_Scale.
NOTE:
The parameters P-0337 and S-0-0091 interact. You can write to either
parameter and the other parameter will then change as well.