–17–
IMPORTANT NO TE CONCERNING MOBILE BROADCAST TE LEVISION RECEPTION:
WHEN USED IN A VEHICLE, TELEVISION BROADCAST RECEPTION WILL BE
ADVERSELY AF FEC TED BY CON DITIONS SUC H AS MOTI ON, CHANGE OF DIRECTION,
ATMOSPHERIC ACTIVITY AND LOCAL SURROUNDINGS.
IT IS THEREFORE LIKELY THAT BROADCAST PICTURE QUALITY WILL BE MARGINAL
WHEN THIS SYSTEM IS USED IN A MOBILE ENVIRONMENT.
CONNECTIONS – ANT ENNA CONNECTION (DVD-2T ONLY)
Connect a TV antenna or CATV cable to the 75Ω antenna jack on the back of the DVD-2T. Be sure to
unplug all connections to the power source before making any other connections.
Setting t he DVD-2T for Air or Cable Channel Reception:
For regular antenna use, the TV Mode should be set to “AIR” (Channels 2~69). For CATV use, t he TV
Mode should be set to “CABLE” (Channels 1~125).
Procedure:
1. Press the SETUP button on the DVD-2T Remote Controller to call up the SETUP
menu.
2. Pre ss t h e X arrow button to select the VIDEO submenu.
3. Press the ENTER button to display the VIDEO submenu.
4. Pre ss t h e ARROW button twice t o select TV MODE.
5. If the desired mode (AIR or CABLE) is already correct, press the SETUP button to exit the menu
scre en s.
6. If the desired mode (AIR or CABLE) is not selected, press the ENTER button and then press the /
arrow butt ons t o highl ight the desired mode.
7. Press the ENTER button and then press the SETUP button to exit the menu screens.
To Next Page
Loading...