22
Table of ContentsSetting Up the LSXUsing the KEF Control AppPlayback and StreamingFAQ and Troubleshooting
7.5.2 Checking for Update Manually
1. To check whether a rmware update is available, launch the KEF Control app.
2. Tap the speaker settings icon ( ) at the top right corner to access the settings menu.
3. Tap “Firmware Update”.
4. If a new rmware is available, tap “Update”.
5. Follow the instructions on the KEF Control app to complete the update (see chapter
“Automatic Update Alert”).
2. 4.
• When the firmware update is completed, you may disconnect the inter-
speaker cable. Cable Mode will automatically be disabled if already done so
before the update.
• If for any reason there is a failure during the firmware update process, you
may recover your speakers through the Recovery Mode feature in the KEF
Control app. See chapter “Recovery Mode”.
To Next Page
Loading...
