23
Table of ContentsSetting Up the LSXUsing the KEF Control AppPlayback and StreamingFAQ and Troubleshooting
7.6 Setting Up Without Wi-Fi
You can still set up the speakers without a Wi-Fi network. However, this will limit the
controls and functionality of the speakers. In addition, important updates and bug fixes
will be missed without Wi-Fi connection.
1. To set up without Wi-Fi connection, connect the power cables to the AC input
connectors at the back of the speakers. The LED indicator on the Master Speaker will
ash orange and white.
2. Point the remote control toward the Master Speaker.
3. Press and hold the source button ( ) on the remote control for 5 seconds until the
LED indicator on the Master Speaker ashes blue and orange. This indicates that Wi-Fi
Mode is disabled.
4. In this mode you will have access to Bluetooth, Optical and AUX Modes.
To resume using the speakers with a Wi-Fi connection, the speakers must be
reset. See chapter "Resetting to Factory Default".
To Next Page
Loading...
