62
Table of ContentsSetting Up the LSXUsing the KEF Control AppPlayback and StreamingFAQ and Troubleshooting
12.4 Maintenance
1. How do I clean the speaker cone?
Regular cleaning is important in order to keep the driver free from dirt and ensure
optimal acoustic performance. Use an anti–static cleaner to clean the Uni-Q driver
carefully with a soft sponge.
2. How do I clean the fabric areas of the LSX?
Normal cleaning
Regular cleaning is important in order to keep the fabric looking its best and to prolong
its life. Vacuum frequently, ideally every week. May also be vacuum cleaned with a soft
brush.
Stain removal
Scrape off any liquids or hardened residues with a spoon or a scoop. Any loose
particles must be vacuum cleaned before further cleaning.
Liquids must be soaked up with an absorbent napkin or cloth.
Remove non-greasy stains by carefully dabbing with a lint-free cloth or sponge wrung
out in warm water. Edge marks can be avoided by dabbing gently in circular motions
towards the center of the stain with a clean lint-free cloth. Remove greasy stains by
using appropriate detergents or solvents. In all cases, we recommend you test stain
removal agents on an inconspicuous area first to see if there is any effect on the fabric.
Warning
1) Do not rub the material hard because this could result in loss of colour or potentially
damage the nap.
2) Never use unconcentrated detergents or bleach, ammonia or soap intended for
hard surfaces.
To Next Page
Loading...
Need help?
General
