Keithley 2000 Calibration Manual

Information in this section includes:
Command summary: Summarizes all commands necessary to perform comprehensive and
factory calibration.
Miscellaneous calibration commands: Gives detailed explanations of the various com-
mands used for miscellaneous functions such as programming the calibration code and date.
DC calibration commands: Details those commands required to calibrate the DCV, DCA,
and ohms functions.
AC calibration commands: Covers commands that calibrate Model 2000 ACV and ACI
functions.
Manufacturing calibration commands: Summarizes the commands necessary to perform
the manufacturing calibration steps.
Bus error reporting: Discusses bus calibration errors and discusses how to obtain error in-
formation.
Detecting calibration step completion: Covers how to determine when each calibration step
is completed by using the *OPC and *OPC? commands.
Calibration Command Reference 3-3

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD