Keithley 2000 Calibration Manual

Generating an SRQ on calibration complete
An SRQ (service request) can be used to detect operation complete instead of repeatedly poll-
ing the Model 2000. To use this method, send both *ESE 1 and *SRE 32 to the instrument, then
include the *OPC command at the end of each calibration command line, as covered above. Re-
fer to your controller's documentation for information on detecting and servicing SRQs.
3-20 Calibration Command Reference

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD