Keithley 2000 Calibration Manual

S
Saving calibration constants 2-19
SCPI command calibration 2-14, 2-22
Setting calibration dates 2-13
Software requirements C-2
Specifications A-1
Status byte EAV (Error Available) bit 3-19
T
Test considerations 1-6
U
Unlocking manufacturing calibration 2-20
Using the *OPC command 3-20
Using the *OPC? query 3-20
V
Verification limits 1-5
Verification test requirements 1-3
Verifying AC current 1-11
Verifying AC voltage 1-8
Verifying DC current 1-10
Verifying DC voltage 1-7
Verifying resistance 1-12
W
Warm-up period 1-3, 2-3

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD