Keithley 3730 User Manual

Series 3700
System Switch/Multimeter User's Manual Section 2:
Using the Front Panel
Document Number: 3700S
-900-01 Rev. A / August 2007 2-
11
DMM key configuration
Pressing the CONFIG key and then the DMM key opens a DMM attribute menu for the active
function. For example, if the DCV function is active, pressing the CONFIG key and then the
DMM key opens the DC VOLT ATTR MENU.
Each function only has access to the applicable attributes for that function. Brief definitions of
the available attributes are contained in the following paragraphs. Refer to the appropriate ICL
contained in the reference manual for additional attribute information (Instrument Control Library
(ICL)).
APERTURE
Configures the aperture setting for the active DMM function in seconds. Related ICL command:
dmm.aperture
AUTODELAY
Configures the auto delay setting for the active DMM function. Related ICL command:
dmm.autodelay
AUTORANGE
Configures the auto range setting for the DMM. Related ICL command: dmm.autorange
AUTOZERO
Configures the auto zero setting for the DMM. Related ICL command: dmm.autozero
DBREF
Configures the DB reference setting for the DMM in volts. Related ICL command:
dmm.dbreference
DIGITS
Configures the display digits setting for the selected DMM function. Related ICL command:
dmm.displaydigits
DRYCIRCUIT
Configures the dry circuit setting for the selected DMM function. Related ICL command:
dmm.drycircuit
FILTER
Opens the FILTER MENU for the selected DMM function. See FILTER key configuration (on
page 2-15).
FUNC
Pressing this key selects the active DMM function for the channel. Related ICL command:
dmm.func

Keithley 3730 Specifications

General

Brand	Keithley
Model	3730
Category	Multimeter
Language	English