Keithley DMM6500

Index
DMM6500 6½ Digit Multimeter
User's Manual
2 DMM6500-900-01Preliminary / April 2018
O
Organization of manual sections • 1-3
P
power
on • 2-3
POWER switch • 2-1
R
remote command interface • 3-1
Remote communications interfaces • 3-1, 5-3, 6-3,
7-4
Resistor grading and binning test • 8-3
Results • 9-7
Review event messages • 2-7
RS-232 • 3-12
S
Sample temperatures at a specific time interval • 7-4
SCAN swipe screen • 2-13
Scanning temperature at a set time interval • 1-3, 7-
1
SCPI • 3-18
Scripts menu • 2-16
Scroll bars • 2-5
SECONDARY swipe screen • 2-11
Select items on the touchscreen • 2-5
Set the GPIB address • 3-12
Set up automatic LAN configuration • 3-3
Set up LAN communications on the computer • 3-4
Set up LAN communications on the instrument • 3-3
Set up manual LAN configuration • 3-4
Setting up the nodes for TSP code • 9-4
SETTINGS swipe screen • 2-9
STATISTICS swipe screen • 2-10
Supported remote interfaces • 3-2
Swipe screen heading bar • 2-7
System menu • 2-17
T
Test results • 5-7, 6-6, 7-7
Touchscreen display • 2-2, 2-5
Trigger menu • 2-16
Trigger model template
grade and binning test • 8-4
troubleshooting • 10-1
FAQs • 10-1
Troubleshooting FAQs • 1-3, 10-1
TSP • 3-18
TSP-Link • 3-14
Turn the DMM6500 on or off • 2-4
U
Unpack and inspect • 3-9, 3-12, 3-14
USB communications • 3-5
Use the LXI Discovery Tool • 3-5
USER swipe screen • 2-12
Using a remote interface • 1-3, 3-1
Using SCPI commands • 5-5, 6-4, 7-5, 8-5, 9-4
Using the front panel • 5-4, 6-4, 7-4
Using the web interface • 3-2, 3-15
Using TSP • 7-6
Using TSP commands • 5-5, 6-5, 8-6, 9-5
V
Views menu • 2-16
W
Wait for the LAN status indicator to turn green • 3-5
warranty • 1-2
Web interface Home page • 3-17
Welcome • 1-1
What is the ethernet port number? • 10-5
Where can I find updated drivers? • 10-1
Why can't the DMM6500 read my USB flash drive? •
10-3
Why did my settings change? • 10-5