Master M 353, 355
Operating manual - EN
3. OPERATION
Before using the equipment, ensure that all the necessary installation actions have been completed according to your
equipment setup and instructions.
Welding is forbidden in places where there is an immediate fire or explosion hazard!
The wire feed cabinet hatch must be kept closed when welding.
Check that there is enough space for cooling air circulation in the machine vicinity.
If the welding equipment is left unused for a longer period, disconnect the mains plug from the mains.
Always check before use that shielding gas hose, earth return cable and clamp and mains cable are in serviceable
condition. Ensure that the connectors are correctly fastened. Loose connectors can impair welding performance and
damage connectors.
© Kemppi
31
1921960 / 2307
To Next Page
Loading...
Need help?
General
