Master M 353, 355
Operating manual - EN
3.7 Lifting Master M equipment
If a gas bottle is installed on cart, DO NOT attempt to lift the cart with the gas bottle in place.
Transportation handle:
The transportation handle can be used for mechanical lifting (for moving only, not for hanging) when the device is not
mounted on a cooling unit or cart.
Connect the hoist hook to the transportation handle.
4-wheel cart:
1. Ensure that the welding equipment is properly secured to the cart.
2. Connect the 4-legged chain or straps from the hoist hook to the four lifting points on the cart on both sides of the
welding equipment.
© Kemppi
54
1921960 / 2307
To Next Page
Loading...
