Kemppi Master M 353 User Manual

Master M 353, 355
Operating manual - EN
2.8 Installing and replacing feed rolls
Replace the feed rolls when the filler wire diameter or material changes. Select the feed rolls according to the tables in
"Wire feeder consumables" on page74.
1. Open the wire feed cabinet hatch.
2. Release the pressure handles on the wire feed mechanism.
3. Open the locking arms to release the feed rolls.
4. Pull the pressure roll mounting pins and drive roll mounting caps off.
© Kemppi
26
1921960 / 2307

Kemppi Master M 353 Specifications

General

Brand	Kemppi
Model	Master M 353
Category	Welding System
Language	English