Master M 353, 355
Operating manual - EN
CONTENTS
1. General 4
1.1 Equipment description 6
1.2 Master M device 8
1.2.1 Wire feed mechanism 9
1.3 Master M Cooler cooling unit (optional) 11
2. Installation 12
2.1 Installing power source mains plug 13
2.2 Installing cooling unit (optional) 14
2.3 Installing equipment on cart (optional) 16
2.4 Connecting welding gun 18
2.5 Connecting earth return cable 19
2.6 Installing remote control (optional) 20
2.7 Installing and changing wire 21
2.8 Installing and replacing feed rolls 26
2.9 Installing and replacing wire guide tubes 28
2.10 Installing gas bottle and testing gas flow 29
3. Operation 31
3.1 Preparing welding system for use 32
3.1.1 Filling cooler and circulating coolant 33
3.2 Calibrating welding cable 34
3.3 Using control panel 35
3.3.1 Control panel: Main view 36
3.3.2 Control panel: Memory channels 38
3.3.3 Control panel: Welding process 38
3.3.4 Control panel: Trigger logic 39
3.3.5 Control panel: Weld Assist 40
3.3.6 Control panel: Welding parameters 41
3.3.7 Control panel: System settings 43
3.3.8 Control panel: Weld data 45
3.4 Additional guidance to functions and features 47
3.4.1 1-MIG 47
3.4.2 Pulse welding 47
3.4.3 MAX Cool process 47
3.4.4 MAX Position process 48
3.4.5 MAX Speed process 48
3.4.6 Trigger logic functions 49
3.4.7 WiseFusion feature 50
© Kemppi
2
1921960 / 2307
To Next Page
Loading...
Need help?
General
