Kemppi Master M 353 - Page 3

Master M 353, 355
Operating manual - EN
3.4.8 WeldEye with DCM (optional) 50
3.5 Using remote control 52
3.6 Changing welding polarity 53
3.7 Lifting Master M equipment 54
4. Maintenance 56
4.1 Daily maintenance 57
4.2 Periodic maintenance 58
4.3 Service workshops 59
4.4 Troubleshooting 60
4.5 Error codes 62
4.6 Installing and cleaning power source air filter (optional) 64
4.7 Disposal 66
5. Technical data 67
5.1 Master M devices 68
5.2 Master M cooling unit 72
5.3 Master M ordering info 73
5.4 Wire feeder consumables 74
5.5 Welding program work packs 76
© Kemppi
3
1921960 / 2307