Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
3. Route the cooling unit's connection cables so that they remain accessible through the next steps.
4. Install the power source on top of the cooling unit. Refer to "Installing cooling unit (optional)" on page9 for install-
ation details.
5. Secure the power source with two screws (M5x12) in the front and two screws (M5x12) in the rear.
© Kemppi
13
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English