MasterTig 535ACDC
Operating manual - EN
* Current range adjustable by welder in TIG welding:
• 2 A ... 505 A (400 V), step 1 A
>> Default = Nominal value of the power source.
• 2 A ... 455 A (220 V), step 1 A
>> Default = Nominal value of the power source.
* Current range adjustable by welder in MMA welding:
• 8 A ... 405 A (400 V), step 1 A
>> Default = MMA maximum current of the power source.
• 8 A ... 385 A (220 V), step 1 A
>> Default = MMA maximum current of the power source.
"Welding processes and features" on page62
3.2.8 Info view
In the Info view you can see information about the equipment usage as well as software version for example.
Included in the Info view:
• Usage counters and Reset button
• Latest weld
• Error status and error log
• Power source and control panel software versions.
© Kemppi
47
1921940 / 2140
To Next Page
Loading...
Need help?
General
