Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
2.10 Replacing control panel
Tools needed:
T20
Detaching control panel
1. Detach the control panel and frame from the power source:
>> Remove the fixing screws at the top and bottom of the panel.
>> First pull the top of the control panel slightly and then the rest of the panel.
© Kemppi
24
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English