Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
2.1 Installing mains plug
Only an authorized electrician is allowed to install the mains cable and plug.
Do not connect the machine to the mains before the installation is complete.
Install the 3-phase plug according to the MasterTig power source and site requirements. Refer also to "Technical data"
on page57 for power source specific technical information.
© Kemppi
8
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English