Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
2.2 Installing cooling unit (optional)
For instructions on installing the equipment on cart, refer to "Installing equipment on cart (optional)" on page12.
The cooling unit must be installed by authorized service personnel.
Do not attempt to move the power source with a hoist from its handle. The handle is meant for moving the equip-
ment when installed on cart.
Tools needed:
1. Remove the power source's rear cover.
© Kemppi
9
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English