Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
2. Route the cooling unit's connection cables so that they remain accessible through the next steps.
3. Lift the power source with a hoist from the lifting eyes and place it on top of the cooling unit so that the fixing
plates align and go into their slots. Fix the units together with two screws in the front and two screws in the rear.
Ensure that the cooling unit's connection cables are not caught and/or damaged between the edges.
© Kemppi
10
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English