MasterTig 535ACDC
Operating manual - EN
Weld Assist automatically sets the following parameters for you:
• Current: Depends on the machine used
• Hot start
• Arc force
• DC+ indicates polarity (in this case the electrode holder is connected to the positive (+) DIX connector).
All these parameters can still be modified as per normal for the actual welding.
3.2.3 Memory channels view
Memory channel is a place to store predefined welding parameter settings for future use. A welding machine can
include a number of preset and user-defined channels.
© Kemppi
38
1921940 / 2140
To Next Page
Loading...
Need help?
General
