Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
Using Weld Assist with MMA welding
1. Go to the Weld Assist view and select 'Start' with the control knob button.
2. Select:
>> The electrode type: Fe-Basic / Fe-Rutile / High Eff. / Ss (stainless steel)/Inox.
>> The electrode diameter (1.6 ... 6 mm).
>> The welding joint type: butt joint / corner joint / lap joint / fillet joint / tube joint / tube+plate joint.
3. Confirm the Weld Assist’s recommendation for welding settings by selecting 'Apply'.
© Kemppi
37
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English