Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
Installing control panel
1. Install the control panel to the frame. Ensure that the panel is firmly attached to the frame.
2. Connect the new control panel’s cable.
3. Mount the control panel in place:
>> Insert the bottom of the panel in the slot first.
>> Push the top of the panel firmly so that it locks in place.
>> Secure the control panel in place with the fixing screws.
© Kemppi
26
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English