Kemppi MasterTig 535ACDC User Manual

MasterTig 535ACDC
Operating manual - EN
Lifting equipment on cart
1. Ensure that the welding equipment is properly secured to the cart.
2. Connect the 4-legged chain or straps from the hoist hook to the four lifting points on the cart on both sides of the
welding equipment.
If a gas bottle is installed on cart, DO NOT attempt to lift the cart with the gas bottle in place.
© Kemppi
29
1921940 / 2140

Kemppi MasterTig 535ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 535ACDC
Category	Welding System
Language	English