MasterTig 535ACDC
Operating manual - EN
MASTERTIG 535ACDCG M
Feature Value
Weight without accessories
57 kg
Arc-on signal for relay
24 V / 50 mA
Voltage supply for cooling unit U
cu
220 ... 460 V
Recommended generator power (min) S
gen
35 kVA
Wireless communication type:
- Control panel MTP35X
(2
- Remote controls HR45, FR45
(2
Transmitter frequency and
power
2.4 GHz Bluetooth, 2400-2483.5 MHz, 10
dBm
Wired communication type Remote
Analog
CAN BUS
Kemppi Remote-Bus
Arc striking voltage
5...11 kV
Stick electrode diameters ø mm
1.6 ... 7.0 mm
TIG welding cable connection type
R1/4
Standards
IEC 60974-1, -3, -10
AS 60974.1
(3
GB/T 15579.1
1)
In AU power source models with the Voltage Reduction Device (VRD) function locked on, only this value is applicable.
2)
NO: These devices are not allowed to be used within a 20 km radius of the centre of Ny-Ålesund at Svalbard,
Norway. This restriction applies to any 2-32 GHz transmitter operation.
3)
Applies only to the power source model versions where the VRD function is locked on.
© Kemppi
59
1921940 / 2140
To Next Page
Loading...
Need help?
General
