Kenwood DMX8520DABS - Page 98

Connection/Installation
98
+
+
+
+
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Gray
Subwoofer Preout
Mid Range Preout
Tweeter Preout
White/Black
Gray/Black
Green/Black
Purple/Black
Speaker impedance: 4-8 Ω
Purple
Green
White
To mid range left
speaker
To mid range right
speaker
To tweeter left speaker
To tweeter right
speaker
Power amplifier
(optional
accessory)
RCA Cable
(Sold separately)
Input
Speaker
Preout
NOTE
• For speaker system setup, see 3-way speaker
system setup (P.78).
• For speaker setup and crossover setup, see
Speaker / X’over setup (P.79).
• For how to connect speaker wires to terminals
other than speaker terminals and Preout
terminals, see Connecting the system and
external components (P.98) and Connecting
wires to terminals (P.96).
Ñ 3-way speaker system setup Ñ Connecting the system and
external components
3
2
1
4
6 578
12
13
14
1011
9
1
Accessory ! : DAB antenna
(DDX9020DABS / DDX920WDABS /
DMX8520DABS only)
2
AV Audio output (ø3.5 mini jack)
3
FM/AM antenna input
4
When connecting to an external amplifier,
connect its ground wire to the car’s chassis to
avoid damaging the unit.
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
Subwoofer Preout
(Left; White, Right; Red)
5
External navigation interface
Connect a navigation unit KNA-G630 (optional
accessory). *
1
6
TV tuner remote output
7
This jack accepts either AV-IN (CA-C3AV;
optional accessory) or camera input.
For more information, see To set up the
camera assignment settings (P.66).
8
Dashboard camera interface
(DDX9020DABS / DDX920WDABS /
DMX8520DABS only)
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.102)