English
|
41
Menu system
Menu System
Setting during operation beep sound etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
2 Select the menu item
Push the Control knob to [FM] or [AM].
Example: When you want to set the beep sound
select the "Beep" display.
3 Set the menu item
Push the Control knob to [4] or [¢].
Example: When "Beep" is selected, each time the
knob is pushed it switches "Beep : ON"
or "Beep : OFF". Select 1 of them as the
setting.
You can continue by returning to step 2 and
setting other items.
4 Exit Menu mode
Press the [MENU] button.
• When other items that are applicable to the basic
operation method above are displayed, afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original setting.)
Also, the explanation for items that aren’t applicable
(<Manual Clock Adjustment> etc.) are entered step
by step.
• It is the item when the menu item of Middle text
display part is selected.
MENU
Control knob
Menu display
MENU
Control knob
B64-2962-00Kr4English.Indd41B64-2962-00Kr4English.Indd41 04.11.1111:30:48AM04.11.1111:30:48AM
To Next Page
Loading...
Need help?
General
