R-SE9T/ DP-SE9/ X-SE9 (En)
48
Preparation sectionBasic sectionApplication sectionKnow ledge sections
Timer operation
Ensure that the power is OFF.
When timer operation is not required
Extinguish the program indication.
To set the same timer program again
Light the program indication.
The reservation contents cannot be cleared. The
contents are cleared only when they are changed.
Check the reservation content.
To change the reserved contents
÷ The reserved contents will be displayed for 3 seconds
per item. After this, the previous display content appears
again.
Restart the procedure of “Timer programming”
from the beginning.
÷ The reservation contents are held in memory.
÷ Also prepare the disc or tape and adjust the listening
volume.
Note
Note
8
Set the program.
÷ The timer does not operate when no program is set.
÷ The “PROG.” indicator lights.
PROG.
1) ):5
R-SE9T
This completes the program timer reservation. Please refer to the following item for confirmation,
changes, etc.
1) ):5
R-SE9T
Goes off
R-SE9T
Lights
Adjust the clock before setting the timer.
band
mode
mode
mode
PROG.
1) ):5
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
