Explosive, easily flammable samples and samples that go into a chemical
reaction when subjected to heat, may not be analysed with the moisture
analyser.
Sample materials emitting toxic substances must be dried with a special
extraction system in place. Create an environment that prevents the inhalation
of vapours hazardous to health.
Sample materials developing aggressive vapours (e. G. Acids) may cause
corrosion problems on some parts of the device.
Careful when removing the sample. The sample itself, the sample dish and
the heating unit may be very hot.
Maintain sufficient space in the environment of the equipment to prevent heat
build-up (distance from the equipment 20cm, upwards 1m).
Do not operate the humidity analyser in areas with hazard of explosion
Do not place anythin which may interfere the unplugging
The power plug must be easily accessible
To Next Page
Loading...
Need help?
General
