KERN DBS 60-3 User Manual

DBS-BA-e-1311 45
9.2 Adjust
9.2.1 Drying modes
9.2.1.1 Drying mode AUTO
(Standard drying/switch-off criterion “∆M“)
Drying will be carried out at the drying temperature preset by the user.
The drying is finished automatically when the preset weight loss (∆M ) remains
constant for 30 seconds.
SETTINGS:
• Drying mode AUTO
• Drying temperature
• ∆M
 Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.

 Press navigation button , then use navigation
buttons   to select “AUTO”.
 Press ENTER to confirm and the currently preset
drying temperature will flash in the display.
 Use navigation buttons   to select the
required setting,
50°C – 200°C (1°C increments) can be selected.
 Press ENTER to confirm selection. The currently
preset value for ∆M will be displayed.
 Use navigation buttons   to select the
required setting, 0.01% – 0.1% (0.01%
increments) can be selected.
 Press ENTER to save.
 Press ESC to return to Moisture analysis mode.
The measuring can be started (see chap. 8.1).
All the settings that have been made control the
drying process.
The switch-off criterion has been fulfilled with a sample whose moisture content is below
0.01%. In this case, we recommend selecting the drying program TIME described below, see
chap. 9.2.1.2

KERN DBS 60-3 Specifications

General

Brand	KERN
Model	DBS 60-3
Category	Measuring Instruments
Language	English