62 DBS-BA-e-1311
10.5 Enter identification number
Options:
Four characters, to select from „0 – 9“ or „A –Z“ or „_“
Default setting: ID „0000“
Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.
Use the navigation keys to select the menu
item „ID“ .
Press ENTER to confirm and a 4-digit number
will be displayed. The active digit is flashing.
Enter the desired ID no. using navigation
buttons (see chapter 3.1.1 „Numeric input“).
Press ENTER to save the input and the display
will change to “SET” followed by “ID”.
Press ESC to return to Moisture analysis mode.
To Next Page
Loading...
Need help?
General
