KERN DBS 60-3 User Manual

DBS-BA-e-1311 51
9.2.1.5 STEP Drying mode (Step drying)
Step-by-step drying is suitable for substances that display special behaviour during
warming. 2 or 3 steps can be selected.
The individual steps are freely selectable regards duration and temperature rising
step.
The drying will end depending on the setting for step 2 or 3, when the preset time
has expired or the preset weight loss (∆M) remains constant for 30 seconds.
Settings:
1. Level
2. Level
3. Level
STEP Drying mode
Drying temperature
Drying temperature
Drying temperature
.
Switch-off criterion
Drying time
Drying time
Drying time
-
or
or
∆M
∆M
1. Press the Menu button to access the menu.

2. Select drying mode
 Press navigation button , then use
navigation buttons   to select “STEP”.
3. Set drying temperature for step 1
 Press ENTER to confirm and the currently
preset drying temperature for step 1 will flash
in the display.
 Use navigation buttons   to select the
required setting,
50°C – 200°C (1°C increments) can be
selected.

KERN DBS 60-3 Specifications

General

Brand	KERN
Model	DBS 60-3
Category	Measuring Instruments
Language	English