KERN DBS 60-3 User Manual

46 DBS-BA-e-1311
9.2.1.2 Drying mode TIME
(Standard drying/switch-off criterion “Time“)
The drying will be carried out at the drying temperature preset by the user and will
end automatically when the preset time has expired.
SETTINGS:
• Drying mode TIME
• Drying temperature
• Drying time
 Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.

 Press navigation button , then use navigation
buttons   to select “TIME”.
 Press ENTER to confirm and the currently preset
drying temperature will flash in the display.
 Use navigation buttons   to select the
required setting,
50°C – 200°C (1°C increments) can be selected.
 Press ENTER to confirm selection. The currently
set drying time is displayed.
 Use navigation buttons   to select the
required setting, 1 minute – 4 hours (1 minute
increments) or 4 hours - 12 hours (1 hour
increments) can be selected
 Press ENTER to save.
 Press ESC to return to Moisture analysis mode.
The equipment is ready to measure
(see chap. 8.1). All the settings that have been
made control the drying process.

KERN DBS 60-3 Specifications

General

Brand	KERN
Model	DBS 60-3
Category	Measuring Instruments
Language	English