DBS-BA-e-1311 57
10 Miscellaneous settings
10.1 Enter sample designation
A 4-digit sample code can be saved for a sample under menu item “CoDE”. This is
output in the measuring protocol.
Options:
1st and 2nd digit: „0 – 9“ or „A –Z“ or „_“
3th and 4th digit: “0-9” (the value is automatically increased by “1” for each
measurement, it reverts to “00” upon reaching “99”)
Default setting: „0000“
Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.
Use the navigation keys to select the
menu item „CoDE“ .
Press ENTER to confirm and a 4-digit number
will be displayed. The active digit is flashing.
Use the navigation buttons to enter the required
sample designation, see chap. 7.1.1 “Numerical
input”.
Press ESC to return to Moisture analysis mode.
To Next Page
Loading...
Need help?
General
