44 DBS-BA-e-1311
9.1 Save / access
10 memory locations, which can be simply called up and started as necessary under
the saved Program number, are available for complete drying processes.
Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.
Use navigation button and confirm by
pressing ENTER.
The current setting will be displayed.
Use navigation buttons to select the
required Program Number, Nos.0 – 9 can be
selected.
Press ENTER to confirm selection.
displays the currently preset drying parameters.
Press ESC to return to Moisture analysis mode.
Set the drying parameters under the selected
program number, see chap. 9.2 below.
To Next Page
Loading...
Need help?
General
