Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.
Only carry out cleaning tasks when the equipment has cooled down.
1. Display
Please do not use aggressive cleaning agents (s
similar agents), but a cloth dampened with mild soap suds.
2. Wind
protection ring
Remove wind protection ring / sample dish, wet clean and dry
thoroughly before fitting
3. Sample dish
4. Housing
Please do not use aggressive cleaning agents (solvents or
similar agents), but a cloth dampened with mild soap suds.
Take care that the device is not penetrated by fluids and polish
it with a dry soft cloth.
Loose residue sample/powder can be removed carefully with a
brush or manual vacuum cleaner.
Remove any spilt sample material immediately.
5. Protective
glass guard